Please help us to help you achieve this. We are nice guys and are here to help! Fraudsters will be dealt with through the courts. Retention of title remains with sixonetwo until goods are paid for in full.
Full terms and conditions are available on request. In the unlikely event there is a problem with an item bought from us, we're on hand to help.
We are keen to help and get the job right. This section is designed to help you understand what jobs our products do. When fitting Spacers to your car, you'll need to extend the length of the bolt from the standard length to: standard length + spacer width.For example if your car takes a standard 28mm bolt and you use a 20mm spacer, you'll need to bolt the spacers on with 48mm long bolts. This needs to be an accurate measurement with a digital gauge.
We'll happily do this for you if you bring a wheel to us. If the bore is very close to the hub size of your car, then it may be that rings are not available. In this case it's often possible for the wheel bores to be precision machined to a larger size (at additional cost) for which there are rings available. If you're in any doubt, give our experts a call.
TPi locks are made to fit both your vehicle and your wheels. For example: tapered (cone shaped), radius (ball shaped) or mag seat (flat seated) If you've changed your wheels from the standard factory ones, then there's every possibility the nuts or bolts will need to be different - and the same applies to the locks. The diagrams to the right should help to explain the difference. TPi Race nuts and bolts are available in tapered fitment only. Please check below for the correct fitment for your car. Don't use the wrong seating type for your wheels. Don't take chances with your safety. These must be tightened with a bar and not by a nut gun, which will damage the finish. SD TUNER NUTS & BOLTS. You need these if your car requires nuts, and the bolt pockets on your wheels are too small for a standard socket.The same applies if your car requires bolts, and the bolt pockets on your wheels are too small for a standard socket. TPi bolts are made to fit both your vehicle and your wheels. For example: tapered (cone shaped), radius(ball shaped) or mag seat (flat seated) If you've changed your wheels from the standard factory ones, then there's every possibility the bolts will need to be different - and the same applies to the locks. If your bolt pockets are smaller than standard and too small to accept a standard socket, then.
You'll need our spline tuner bolts. We can guide you towards to correct fitments for your car and wheels. TPi nuts and locks are made to fit both your vehicle and your wheels. Also that your wheels have tapered seated (cone shaped) bolt pockets.
If you've changed your wheels from the standard factory ones, then there's every possibility the nuts or bolts will need to be different - and the same applies to the locks. You'll need our SD tuner nuts. Our Premium quality plastic wheel nut/bolt covers to hide the decayed original ones on your car. Fit snugly over the top to improve the look of your wheels.
These will not fit locking wheel nuts/bolts. You may also be interested in. TPi Wheel Location Spigot Reducer Rings 72.6mm - 70.1mm. Land Rover Black Finished Alloy Wheel Nuts DEFENDER L663.
Genuine Land Rover Black Locking Wheel Nuts & 16 Nuts 14x1.50 Discovery 4. Genuine Land Rover NEW STYLE Locking Wheel Nuts 14x1.50 VOGUE L405.
This item is in the category "Vehicle Parts & Accessories\Car Parts & Accessories\Wheels, Tyres & Parts\Wheel Nuts, Bolts & Studs". The seller is "sixonetwo_ltd" and is located in this country: GB. This item can be shipped to United Kingdom.