GENUINE JAGUAR BLACK Wheel Nuts & Locks M12X1.50 FLAT SEATED X 16 XJ

Range Rover Grilles, Vents, Parts & Accessories. Side Steps / Running Boards. > Range Rover Sport (05-09).

Land Rover Discovery 5 L462. Land Rover Discovery 4 L319. Land Rover Discovery 3 L319.

Land Rover Defender L663 90. Land Rover Defender L663 110. Land Rover Defender L663 130. Bentley GT/C & Flying Spur. TPi Nut & Bolt Covers.

VW Transporter T5 & T6. Browse the shop for the best quality parts. GENUINE JAGUAR BLACK Wheel Nuts & Locks M12X1.50 FLAT SEATED X 16 - XJ. Quality and service means everything to us. Items dispatched same day if ordered before 3pm. Part Number WNJAG400N-BLACK LN43171A147BK Description - GENUINE Jaguar Black Wheel Nut Locks. 12 x 1.50 Flat Seated.

Fitment - F Type - S Type - X Type - XF - XK - XJ - XKR What's Included - 16 x GENUINE Jaguar Black Nuts. 4 x GENUINE Jaguar Black Lock Nuts. Notes Please note that these nuts are for GENUINE JAGUAR WHEELS.

Scottish Highlands AB30-38, AB44-56, FK17-99, G83, IV1-28, IV30-39, IV52-54, IV63, KW1-14, PA21-40, PH18-26, PH30-41, PH49-50 Scottish Islands HS1-9, IV40-51.. GENUINE Jaguar Black Wheel Nut & Locks. 12 x 1.50 Flat Seated. 16 x GENUINE Jaguar Black Nuts. 4 x GENUINE Jaguar Black Lock Nuts. Please note that these nuts are for GENUINE JAGUAR WHEELS.

AB30-38, AB44-56, FK17-99, G83, IV1-28, IV30-39, IV52-54, IV63, KW1-14, PA21-40, PH18-26, PH30-41, PH49-50 Scottish Islands HS1-9, IV40-51, IV55-56, KA27-28, KW15-17, PA20, PA30, PA32-34, PA41-49, PA60-78, PH42-44, ZE1-3, Channel Islands & Scilly Isles. On receipt of cleared funds, we will dispatch your goods the same day.

We use Interlink Express for our NEXT DAY UK mainland deliveries. We can cater for either express or economy deliveries overseas. Our experience is that Europe by road is the most cost effective way to send. We will do our utmost to track your order for you. Please help us to help you achieve this.

We are nice guys and are here to help! Fraudsters will be dealt with through the courts. Retention of title remains with sixonetwo until goods are paid for in full.

Full terms and conditions are available on request. In the unlikely event there is a problem with an item bought from us, we're on hand to help. We are keen to help and get the job right. This section is designed to help you understand what jobs our products do.

When fitting Spacers to your car, you'll need to extend the length of the bolt from the standard length to: standard length + spacer width. For example if your car takes a standard 28mm bolt and you use a 20mm spacer, you'll need to bolt the spacers on with 48mm long bolts. This needs to be an accurate measurement with a digital gauge.

We'll happily do this for you if you bring a wheel to us. If the bore is very close to the hub size of your car, then it may be that rings are not available. In this case it's often possible for the wheel bores to be precision machined to a larger size (at additional cost) for which there are rings available.

If you're in any doubt, give our experts a call. TPi locks are made to fit both your vehicle and your wheels.

For example: tapered (cone shaped), radius (ball shaped) or mag seat (flat seated) If you've changed your wheels from the standard factory ones, then there's every possibility the nuts or bolts will need to be different - and the same applies to the locks. The diagrams to the right should help to explain the difference. TPi Race nuts and bolts are available in tapered fitment only.

Please check below for the correct fitment for your car. Don't use the wrong seating type for your wheels. Don't take chances with your safety. These must be tightened with a bar and not by a nut gun, which will damage the finish.

SD TUNER NUTS & BOLTS. You need these if your car requires nuts, and the bolt pockets on your wheels are too small for a standard socket. The same applies if your car requires bolts, and the bolt pockets on your wheels are too small for a standard socket. TPi bolts are made to fit both your vehicle and your wheels. For example: tapered (cone shaped), radius(ball shaped) or mag seat (flat seated) If you've changed your wheels from the standard factory ones, then there's every possibility the bolts will need to be different - and the same applies to the locks.

If your bolt pockets are smaller than standard and too small to accept a standard socket, then. You'll need our spline tuner bolts. We can guide you towards to correct fitments for your car and wheels. TPi nuts and locks are made to fit both your vehicle and your wheels.

Also that your wheels have tapered seated (cone shaped) bolt pockets. If you've changed your wheels from the standard factory ones, then there's every possibility the nuts or bolts will need to be different - and the same applies to the locks. You'll need our SD tuner nuts. Our Premium quality plastic wheel nut/bolt covers to hide the decayed original ones on your car. Fit snugly over the top to improve the look of your wheels.

These will not fit locking wheel nuts/bolts. You may also be interested in. Jaguar Selena Chrome Alloy Wheel Insert x 1 XF XJ XK Selina. Jaguar Selena Chrome Alloy Wheel Insert x 20 XF XJ XK Selina. BLACK OE JAGUAR Locking Wheel Nut M12X1.50 FLAT SEATED - XF.

Jaguar Selena Chrome Alloy Wheel Insert x 5 XF XJ XK Selina.