, may already have 5mm spacers fitted from the factory which will have to be removed before fitting this kit. A full spacer kit including extra-long bolts with locks. Thatcham approved locks - high security. All bolts have'floating' radius washer (correct for OE Porsche wheels). No wheel vibrations (unlike cheap spacers).
Correct 170mm outer diameter to perfectly match Porsche hubs. NOT to be confused with cheap kits! 2 x 15mm hub-centric spacers for rear wheels. 2 x 7mm hub-centric spacers for front wheels. Bolts for use with 7mm spacers.
Bolts for use with 15mm spacers. 2 x Locking wheel bolts for use with 7mm spacers.
2 x Locking wheel bolts for use with 15mm spacers. 1 x Key adaptor to fit all four locks. 1 x Fitting guide / instructions.
This is everything you need to space your front and rear wheels. This combination of 7mm at the front and 15mm at the rear is the perfect, most proven set-up on Porsches. IMPORTANT: You must check wheel arch clearance before ordering. The spacers Two 15mm wheel spacers are included in this kit. These should NOT be confused with cheap universal items!They are precision machined from billet aluminium and designed for a perfect hub-centric fit. They are perfectly balanced and so will not disturb the vehicles wheel balancing. They are machined from billet aluminium - not cheap cast aluminium and are clear anodised for long lasting corrosion protection.
The non-locking bolts This kit includes Porsche style extended length wheel bolts. They feature the'captive' (freely rotating) washers and'radius' seats that you would find on an OE Porsche wheel bolt. They are made to the same high standards and actually have a superior plated finish!
We believe these are the BEST bolts you could possibly fit to your Porsche. These bolts are far superior to ordinary'compatible' bolts.
They feature a dished top design and the correct 19mm hex head as found on original Porsche bolts. The Locking bolts Specially designed for use with Porsches when 7mm spacers have been fitted to the front and 15mm to the rear. The outer ring is free to rotate without unthreading the bolt.
This means the bolt cannot be gripped without the key - an excellent security device! The bolts are made from heat treated carbon alloy steel and are drill and punch resistant.They are Thatcham tested and approved and are manufactured to ISO9001 & QS9000 standards. Each locking set is supplied with a unique key code (found on a sticker inside the box). Note: The key profile design shown in the picture will vary from one set to the next - every set is different! Please measure the space available inside the arch lip and with respect to other suspension components BEFORE ORDERING.
THIS PART IS THE BUYERS RESPONSIBILITY! Porsche 911 (996) (1997 - 2005) Porsche 911 (997) (2005 - 2012) Porsche 911 (991) (2012 - 2016). Porsche 911 (992) (2016 +) Porsche Boxster (986) (1996 - 2004) Porsche Boxster (987) (2004 - 2012) Porsche Boxster (981) (2012 - 2016). Porsche Boxster 718 (982) (2016 +) Porsche Cayman (987C) (2005 - 2012) Porsche Cayman (981C) (2012 - 2016). Porsche Cayman 718 (982C) (2016 +) Porsche Panamera (970) (2009 - 2017).Porsche Panamera (971) (2017 +). Spacer centre hole (hub centre diameter). Spacer PCD of bolt holes. Rear Spacer Specifications Spacer material: Billet aluminium Spacer finish: Clear anodised Spacer thickness: 15mm per spacer Spacer overall diameter: 170mm Spacer centre hole (hub centre diameter): 71.6mm Spacer PCD of bolt holes: 130mm. Heat treated carbon alloy steel.
Non-Locking Rear Bolt Specifications Bolt thread size: M14 x 1.5 Bolt thread length: 45mm Bolt overall head width: 27mm Bolt overall length: 75mm (inc the head) Bolt seat type: Radius (Round shaped) Bolt material: Heat treated carbon alloy steel Bolt finish: Bright zinc plated Bolt spanner size: 19mm Hex. Locking Bolt Kit Specifications Thread size: M14 x 1.5 Thread length: 35mm (front) / 45mm (rear) Overall bolt width: 24mm Overall bolt length: 63mm (front) / 72mm (rear) Seat type: Radius (round shaped) Bolt material: Heat treated carbon alloy steel bolt finish: Black zinc plated.Key adaptor width: 29mm Key adaptor spanner size: 19mm Hex Key adaptor material: Heat treated carbon alloy steel. This item is in the category "Vehicle Parts & Accessories\Car Parts & Accessories\Wheels, Tyres & Parts\Wheel Spacers, Adapters & Spigot Rings". The seller is "tech_world_direct" and is located in this country: GB. This item can be shipped to United Kingdom, Antigua and Barbuda, Austria, Belgium, Bulgaria, Republic of Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei Darussalam, Cayman Islands, Dominica, Ecuador, Guernsey, Gibraltar, Guadeloupe, Grenada, French Guiana, Iceland, Jersey, Jordan, Cambodia, Saint Kitts-Nevis, Saint Lucia, Liechtenstein, Sri Lanka, Macau, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Turks and Caicos Islands, Aruba, Saudi Arabia, United Arab Emirates, Chile, Bahamas, Colombia, Costa Rica, Dominican Republic, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Qatar, El Salvador, Trinidad and Tobago, Vietnam.