20x M12x1.5 CHROME Wheel Stud & Nut Conversion Kit 82mm Length AND LOCKING NUTS

Thanks for viewing our advert. 20 x M12 x 1.5 Screw in Hub Conversion Studs HT 10.9 Grade Self Colour Suitable for any M12 x 1.5 application. 16 x M12 x 1.5 60degree Taper Zinc Coated Wheel Nuts. 4 x Locking Wheel Nuts with Driver.

Total Length End to End = 82mm. Screw In thread length = 14mm. Threaded Length from Hip to Blank = 52mm. Hip Length between threaded sections = 5mm. Blank Tip Length = 12mm.

Required Allen Key = 5mm. Max Diameter at top of Taper = 24mm.

Taper Angle = 60 Degrees. NUT QUANTITY 16 + 4 LOCKING BOLTS.

LOCKING NUTS ARE SILVER CHROME ONLY AND CAN TAKE A 19MM OR 17MM SOCKET ON THE KEY.