16 x plain wheel bolts. 4 x locking wheel bolts 1 x key adaptor 1 x key number sticker (not shown in pic). 1 x presentation box for the lock set.These bolts are top quality and feature the'floating' (freely rotating) washers and'Radius' seats that you would find on an OE Porsche wheel bolt. They are made to the same high standards and actually have a superior plated finish!
We believe these are the BEST bolts you could possibly fit to your Porsche. Unlike some cheap bolts from China these are made in the EU, in an ISO9000 approved factory and have TUV approval. They are bright zinc plated to a high standard. This finish will not chip or crack off as with cheap bolts. About the Locks The outer ring is free to rotate without unthreading the bolt.This means the bolt cannot be gripped without the key - an excellent security device! The locking bolts are made from heat treated carbon alloy steel and are drill and punch resistant. They are Thatcham tested and approved and are manufactured to ISO9001 & QS9000 standards. Each set is supplied with a unique key code (found on a sticker inside the box).
Note: The key profile design shown in the picture will vary from one set to the next - every set is different! Will they fit my Porsche? IMPORTANT: These wheel bolts have a thread length of 28mm.
They will fit all the Porsche models listed below, however, you should still double check that the bolt length is suitable for your particular wheels before you order. In some cases - longer bolts are required. As a general rule; if you have original wheels without spacers then you should be OK, but it is best to check! Porsche 911 (996) (1997 - 2005) Porsche 911 (997) (2005 - 2012) Porsche 911 (991) (2011+) Porsche Boxster (986) (1996 - 2004) Porsche Boxster (987) (2004 - 2012) Porsche Boxster (981) (2012 - 2016) Porsche Cayman (987C) (2005 - 2012) Porsche Cayman (981C) (2012 - 2016) Porsche Panamera (970) (2009 - 2016) Specifications Thread size: M14 x 1.5 Thread length: 28mm Spanner size: 19mm Overall bolt width: 27mm (plain) / 24mm (locking) Overall bolt length: 58mm (plain) / 49mm (locking) Seat type: Radius (round shaped) Bolt material: Heat treated carbon alloy steel Nut finish: Bright zinc plated.
Locking key adaptor width: 29mm Locking key adaptor spanner size: 19mm Hex. Goods are packaged securely to arrive to you in perfect condition. Overseas orders will be sent with'International signed for' service and tracking details will be sent to you upon despatch. The item "20x ALLOY WHEEL BOLTS + LOCKING SET PORSCHE 911 996 997 991 STUD LUG NUT T4e" is in sale since Tuesday, October 31, 2017.
This item is in the category "Vehicle Parts & Accessories\Car Wheels, Tyres & Trims\Nuts, Bolts & Studs". The seller is "tech_world_direct" and is located in Essex.
This item can be shipped worldwide.